We've encountered this post about How to Troubleshoot and Repair an Electric Water Heater listed below on the internet and reckoned it made perfect sense to share it with you here.
Several modern houses take advantage of an electric hot water heater for their heater, due to its comfort and ease of use. Nevertheless, similar to any other electrical devices, troubles may arise with its use, all of a sudden. It can be really frustrating to get up to a chilly shower rather than a warm one or having your bathroom with water that isn't warm sufficient or perhaps also warm. Whatever the case might be, water heater problems can be fairly aggravating. Fortunately, we've made a checklist of feasible services to your water heater problems. There are a number of variables that can trigger much of these troubles, maybe an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it repaired need to not posture too much of a problem if you follow these steps:
Call A Professional:
If after changing all defective components and also resetting your temperature, the water heater still isn't working, you might require to call a specialist plumber for a specialist point of view. The issue with your heating unit could be that the cold and hot taps have been changed or it may be undersized for the quantity of warm water required in your home. Whatever the case might be, a professional plumber would help address the trouble.
Check Your Power Supply:
As basic as this may appear, it is extremely necessary. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power issue. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the concern, just turn it off and on once again. Replace any broken or worn-out fuse. Test the appliance with power after these adjustments to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature level setups on your top thermostat. Make certain the breaker is turned off before doing anything. Open up the accessibility panel as well as press the red button for temperature level reset above the thermostat. This must help warm the water. Turn the breaker back on and inspect if the trouble has actually been dealt with.
Inspect the Burner in the Hot Water Heater:
If it's not a power issue, then try looking into your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any of them is damaged, change that component and afterwards check whether the warm water is back on.
Conclusion
Hot water heater troubles are not always major. A number of them are because of minor issues like a blown fuse or worn-out heating element. Changing the defective parts ought to do the trick. However, if you are still unable to address the trouble, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you like reading about Hot Water Heater Repair? Try leaving a comment below. We'd be glad to listen to your thinking about this write-up. We hope to see you back again in the future. If you appreciated our post plz remember to pass it around. Thanks a lot for going through it.
Quick fix? Dial!